Submersible VCGE 115 pumps
Submersible VCGE 115 pumps
Description
The pump marked VCGE 115 R1 is small, portable, and submersible. It is compact and versatile for pumping clean or muddy (slightly turbid) water, but it is not recommended to pump aggressive media with it. Sludge as sediment or solid particles must not enter the pump. The pump can be operated permanently, completely, or partially immersed in a liquid with a temperature not exceeding 35°C. It is suitable for pumping groundwater, for emptying swimming pools and reservoirs, watering or irrigating gardens, individual construction and in case of minor floods in basements.
Technical characteristics
Flow: from 0 to 84l/min
Lifting pumping height: up to 10m
Motor power: 0.6 kW
Power supply: 1-phase (230V), 50Hz
Medium temperature: from 0°C to + 35°C
Installation depth: up to 3m in medium
Weight: 5.7kg
The side of the manhole for the installation of a pump with a float switch must be at least 500 mm high. The pump housing is made of aluminum alloy. The pump is driven by a single-phase electric motor with a nominal power of 600W and is protected against overload by a built-in thermal shut-off switch. The pump, equipped with a float switch, is marked with an additional A mark, and allows automatic operation. At start-up, the pump must be installed in a liquid. The start-up boost is minimal. The pump sucks water through the suction basket and drains it through a pipe connection to which a plastic pipe is connected.
Purpose of use
Construction
Flooded basements, shafts
For emergencies in case of minor floods
domestic use
for irrigation systems
farms
pool technology
industrial purposes
watering and irrigation systems
Pump characteristics (Q / H Diagram)
Diagram and basic dimensions of pumps
