The best mixing results are achieved by mixers mounted on PRMC 200 accessories. These are steel constructions that allow the mixers to be turned and tilted in different directions. The mixers are made in a compact and robust design. They are adapted to the most difficult operating conditions. The mixer housings and propeller are made of gray cast iron and protected with a durable anti-corrosion coating. The propeller in the size of 200 is made of bronze. The shape of the propeller allows the mixer maximum hydraulic effects, while at the same time preventing the retention of fibrous materials on it. The size 200 has a common engine and propeller shaft that has a double seal. The chamber between the double seals is filled with biodegradable hydraulic oil which does not endanger the environment in the event of a mixer failure. The underwater electric motor has a dry winding with a built-in automatic thermal protection switch which interrupts the control circuit when the electric motor overheats. During operation, the mixer must be completely immersed in the liquid being mixed. The fluid cools the motor housing. Electric motor equipment:

PMPT 200: connection cable 7G-1.5, length 10m, motor protection switch, direct start

PMPE 200: connection cable 4G-1.5, length 10m, cabinet with capacitor and motor protection switch.

Accessories:

Accessories with PRMC 200